It doesn’t matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always operational is necessary. Indeed, bulbs are wearing units that will undoubtedly burn out with time and as a result need to be changed. You’re probably on the website because one of your parking lights is burnt out and you’re questioning how to change your Volvo XC90’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volvo XC90.

change-license-plate-bulb-volvo-xc90

How to change the license plate bulb on your Volvo XC90 coming from the outside

This solution is the simplest of the two, actually, for this one you will simply require to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this article content to explain the method.
So let’s start with changing the number plate bulb by going through the outside of your Volvo XC90. It doesn’t matter if it’s the front or the back of your automobile the process will be the same.
Here are a few simple guidelines to follow to conduct this maintenance tasks:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volvo XC90
  • .

  • Use your screwdriver or knife to remove the bulb from its place, in the event that you are scared of destroying a thing, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to validate the achievement of the procedure.

How to replace the number plate bulb on your Volvo XC90 without outside access

Second section of our content page, replace this license plate bulb on your Volvo XC90 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Volvo XC90

To change the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Volvo XC90

Finally last solution, you must change the bulb on the backplate of your Volvo XC90, but you are not able to open the cover from the outside of your automobile. In such a case, here is the technique to accomplish this operation:

  • Disconnect the battery from your Volvo XC90
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Volvo XC90, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main approaches for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Volvo XC90. If you want to change other bulbs like the position light bulbs on your Volvo XC90 or the low beam bulbs on Volvo XC90, don’t be reluctant to browse our content articles which demonstrate you the procedure to follow.

In the event that you have any further questions about the Volvo XC90, do not hesitate to consult our Volvo XC90 category.