Regardless whether it’s for your own security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are all the time effective is extremely important. Indeed, bulbs are wearing auto parts that will inevitably burn out as time passes and as a result need to be changed. You’re probably on this website because one of your parking lights is burnt out and you’re struggling with how to change your volvo xc70’s license plate bulb, we’ve created this document to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your volvo xc70.
How to replace the license plate bulb on your volvo xc70 through the outside
This approach is the simplest of the two, actually, for this one you will simply need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article content to clarify the way.
So let’s start with changing the number plate bulb by going through the outside of your volvo xc70. Regardless whether it’s the front or the back of your vehicle the method will be the same.
Here are a few simple actions to follow to conduct this service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your volvo xc70
- Use your screwdriver or knife to eject the bulb from its spot, if you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the operation.
.
How to change the number plate bulb on your volvo xc70 without outside access
Second part of our content, change this license plate bulb on your volvo xc70 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my volvo xc70
To replace the one on the front plate, nothing could be easier, you will have to position yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my volvo xc70
Finally last option, you must replace the bulb on the backplate of your volvo xc70, but you are not able to open the cover from the outside of your vehicle. In this case, here is the tactic to carry out this operation:
- Unplug the battery from your volvo xc70
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your volvo xc70, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for changing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to do it following the outline of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your volvo xc70. If you wish to change other bulbs like the position light bulbs on your volvo xc70 or the low beam bulbs on volvo xc70, don’t be reluctant to read our content articles which describe you the procedure to follow.
To discover more tips on the volvo xc70, take a look at the volvo xc70 category.
