Regardless whether it’s for your own personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are in every case operational is extremely important. Indeed, bulbs are wearing auto parts that will undoubtedly burn out after a while and as a consequence need to be swapped out. You’re perhaps on this website because one of your parking lights is burnt out and you’re questioning how to change your volvo v70’s license plate bulb, we’ve written and published this article to help you do it on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your volvo v70.
How to swap the license plate bulb on your volvo v70 coming from the outside
This technique is the simplest of the two, in reality, for this one you will simply require to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this content to clarify the way.
So let’s start with replacing the number plate bulb by going through the outside of your volvo v70. Regardless whether it’s the front or the back of your motor vehicle the technique will be identical.
Here are a few simple actions to follow to carry out this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your volvo v70
- Use your screwdriver or knife to remove the bulb from its place, in the event that you are scared of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your volvo v70 without outside access
Second section of our content page, change this license plate bulb on your volvo v70 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my volvo v70
To swap the one on the front plate, nothing could be simpler, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force or you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my volvo v70
Finally last option, you must swap the bulb on the backplate of your volvo v70, but you cannot really open the cover from the outside of your motor vehicle. In this instance, here is the solution to carry out this operation:
- Unplug the battery from your volvo v70
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your volvo v70, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for replacing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to realize it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your volvo v70. If you desire to change other bulbs like the position light bulbs on your volvo v70 or the low beam bulbs on volvo v70, don’t be reluctant to read our articles which describe you the process to follow.
To discover more tips on the volvo v70, take a look at the volvo v70 category.
