Regardless whether it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time functional is extremely important. Indeed, bulbs are wearing auto parts that will undoubtedly burn out after some time and as a result need to be replaced. You’re almost certainly on this site because one of your parking lights is burnt out and you’re wondering how to change your Volvo V60’s license plate bulb, we’ve written this content page to help you do it without any help and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volvo V60.

change-license-plate-bulb-volvo-v60

How to replace the license plate bulb on your Volvo V60 throughout the outside

This tactic is the least difficult of the two, in truth, for this one you will simply need to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this content page to clarify the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Volvo V60. Regardless whether it’s the front or the back of your automobile the method will be similar.
Here are a few simple actions to stick to to perform this service:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volvo V60
  • .

  • Use your screwdriver or knife to remove the bulb from its placement, in the event you are worried of breaking a thing, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the process.

How to replace the number plate bulb on your Volvo V60 without outside access

Second section of our content, replace this license plate bulb on your Volvo V60 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Volvo V60

To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.

How to replace the rear license plate bulb on my Volvo V60

Finally last solution, you must replace the bulb on the backplate of your Volvo V60, but you cannot really open the cover from the outside of your automobile. In this case, here is the approach to execute this task:

  • Unplug the battery from your Volvo V60
  • Identify the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Volvo V60, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have found out the main solutions for swapping license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Volvo V60. If you wish to change other bulbs like the position light bulbs on your Volvo V60 or the low beam bulbs on Volvo V60, don’t hesitate to browse our articles which demonstrate you the procedure to follow.

In the event that you have any additional questions about the Volvo V60, do not hesitate to consult our Volvo V60 category.