Regardless whether it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are always working is really important. In fact, bulbs are wearing auto parts that will predictably burn out after some time and therefore need to be swapped out. You’re quite likely on the website because one of your parking lights is burnt out and you’re worried about how to change your Volkswagen Up!’s license plate bulb, we’ve written and published this article to help you do it by yourself and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Up!.
How to swap the license plate bulb on your Volkswagen Up! coming from the outside
This option is the simplest of the two, in truth, for this one you will just require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this content to describe the method.
So let’s start with swapping the number plate bulb by going through the outside of your Volkswagen Up!. Regardless whether it’s the front or the back of your car the process will be identical.
Here are a few simple actions to follow to execute this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Up!
- Use your screwdriver or knife to eject the bulb from its place, in the event you are scared of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the procedure.
.
How to change the number plate bulb on your Volkswagen Up! without outside access
Second part of our content page, change this license plate bulb on your Volkswagen Up! without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen Up!
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen Up!
Finally last option, you must swap the bulb on the backplate of your Volkswagen Up!, but you cannot open the cover from the outside of your car. In this instance, here is the tactic to execute this operation:
- Disconnect the battery from your Volkswagen Up!
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Volkswagen Up!, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Volkswagen Up!. If you need to change other bulbs like the position light bulbs on your Volkswagen Up! or the low beam bulbs on Volkswagen Up!, don’t hesitate to browse our content articles which describe you the operation to follow.
If you have any further questions about the Volkswagen Up!, do not hesitate to consult our Volkswagen Up! category.
