Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are always functioning is fundamental. Indeed, bulbs are wearing parts that will inevitably burn out after a while and consequently need to be swapped out. You’re quite likely in this article because one of your parking lights is burnt out and you’re worried about how to change your Volkswagen Transporter’s license plate bulb, we’ve made this content page to help you do it by yourself and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Transporter.
How to replace the license plate bulb on your Volkswagen Transporter coming from the outside
This approach is the quickest of the two, in fact, for this one you will simply require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article content to describe the way.
So let’s begin with changing the number plate bulb by going through the outside of your Volkswagen Transporter. Regardless whether it’s the front or the back of your automobile the process will be identical.
Here are a few simple actions to follow to perform this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Transporter
- Use your screwdriver or knife to eject the bulb from its location, if you are worried of destroying anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Volkswagen Transporter without outside access
Second part of our content, change this license plate bulb on your Volkswagen Transporter without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Volkswagen Transporter
To replace the one on the front plate, nothing could be less complicated, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Volkswagen Transporter
Finally last possibility, you must replace the bulb on the backplate of your Volkswagen Transporter, but you cannot really open the cover from the outside of your automobile. In such a case, here is the method to perform this operation:
- Disconnect the battery from your Volkswagen Transporter
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volkswagen Transporter, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for changing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Volkswagen Transporter. If you want to change other bulbs like the position light bulbs on your Volkswagen Transporter or the low beam bulbs on Volkswagen Transporter, don’t hesitate to browse our articles which describe you the operation to follow.
Whenever you have any further questions about the Volkswagen Transporter, do not hesitate to consult our Volkswagen Transporter category.
