Regardless whether it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly functional is very important. Indeed, bulbs are wearing units that will inevitably burn out over the years and consequently need to be replaced. You’re probably on this site because one of your parking lights is burnt out and you’re struggling with how to change your Volkswagen Touran 2’s license plate bulb, we’ve written this article content to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Touran 2.
How to swap the license plate bulb on your Volkswagen Touran 2 throughout the outside
This option is the least difficult of the two, in fact, for this one you will just have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article content to describe the method.
So let’s start with changing the number plate bulb by going through the outside of your Volkswagen Touran 2. Regardless whether it’s the front or the back of your motor vehicle the procedure will be identical.
Here are a few simple guidelines to follow to carry out this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Touran 2
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are worried of breaking a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.
.
How to change the number plate bulb on your Volkswagen Touran 2 without outside access
Second section of our document, change this license plate bulb on your Volkswagen Touran 2 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen Touran 2
To swap the one on the front plate, nothing could be much easier, you will have to position yourself under the motor vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen Touran 2
Finally last possibility, you must swap the bulb on the backplate of your Volkswagen Touran 2, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the method to accomplish this task:
- Unplug the battery from your Volkswagen Touran 2
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Volkswagen Touran 2, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main methods for changing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Volkswagen Touran 2. If you need to change other bulbs like the position light bulbs on your Volkswagen Touran 2 or the low beam bulbs on Volkswagen Touran 2, don’t be reluctant to read our articles which describe you the operation to follow.
If you have any further questions about the Volkswagen Touran 2, do not hesitate to consult our Volkswagen Touran 2 category.
