Regardless whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time functioning is fundamental. In fact, bulbs are wearing auto parts that will predictably burn out after a while and consequently need to be replaced. You’re probably on this site because one of your parking lights is burnt out and you’re wondering how to change your Volkswagen T-Cross’s license plate bulb, we’ve made this content page to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen T-Cross.

change-license-plate-bulb-volkswagen-t-cross

How to replace the license plate bulb on your Volkswagen T-Cross through the outside

This solution is the most simple of the two, in fact, for this one you will simply need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this document to explain the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Volkswagen T-Cross. Regardless whether it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple actions to stick to to conduct this maintenance tasks:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen T-Cross
  • .

  • Use your screwdriver or knife to eject the bulb from its location, in the event you are afraid of breaking anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.

How to replace the number plate bulb on your Volkswagen T-Cross without outside access

Second section of our content page, replace this license plate bulb on your Volkswagen T-Cross without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Volkswagen T-Cross

To replace the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Volkswagen T-Cross

Finally last option, you must replace the bulb on the backplate of your Volkswagen T-Cross, but you are not able to open the cover from the outside of your automobile. In this case, here is the process to operate this task:

  • Disconnect the battery from your Volkswagen T-Cross
  • Identify the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Volkswagen T-Cross, verify it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have discovered the main techniques for swapping license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Volkswagen T-Cross. If you want to change other bulbs like the position light bulbs on your Volkswagen T-Cross or the low beam bulbs on Volkswagen T-Cross, don’t hesitate to read our content articles which explain you the process to follow.

If perhaps you have any additional questions about the Volkswagen T-Cross, do not hesitate to consult our Volkswagen T-Cross category.