It doesn’t matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are in every case functional is extremely important. Indeed, bulbs are wearing auto parts that will surely burn out after some time and as a result need to be swapped out. You’re almost certainly on this website because one of your parking lights is burnt out and you’re wondering how to change your Volkswagen Polo 5’s license plate bulb, we’ve made this content page to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Polo 5.
How to swap the license plate bulb on your Volkswagen Polo 5 coming from the outside
This method is the most simple of the two, actually, for this one you will simply require to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second section of this content page to describe the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Volkswagen Polo 5. It doesn’t matter if it’s the front or the back of your motor vehicle the method will be similar.
Here are a few simple guidelines to stick to to conduct this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Polo 5
- Use your screwdriver or knife to eject the bulb from its location, if you are worried of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the success of the operation.
.
How to replace the number plate bulb on your Volkswagen Polo 5 without outside access
Second section of our content page, swap this license plate bulb on your Volkswagen Polo 5 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen Polo 5
To swap the one on the front plate, nothing could be less difficult, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen Polo 5
Finally last solution, you must swap the bulb on the backplate of your Volkswagen Polo 5, but you simply cannot open the cover from the outside of your motor vehicle. In this case, here is the technique to perform this task:
- Unplug the battery from your Volkswagen Polo 5
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volkswagen Polo 5, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main tactics for replacing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Volkswagen Polo 5. If you want to change other bulbs like the position light bulbs on your Volkswagen Polo 5 or the low beam bulbs on Volkswagen Polo 5, don’t be reluctant to read our content articles which demonstrate you the operation to follow.
If you need more tutorials on the Volkswagen Polo 5, go to our Volkswagen Polo 5 category.
