Regardless it’s for your specific safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly operational is fundamental. In reality, bulbs are wearing units that will obviously burn out after a while and as a consequence need to be replaced. You’re probably here because one of your parking lights is burnt out and you’re wanting to know how to change your Volkswagen ID.4’s license plate bulb, we’ve made this content to help you do it all on your own and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen ID.4.
How to swap the license plate bulb on your Volkswagen ID.4 coming from the outside
This tactic is the fastest of the two, in truth, for this one you will only require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this content page to show you the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Volkswagen ID.4. Regardless it’s the front or the back of your motor vehicle the method will be identical.
Here are a few simple guidelines to follow to execute this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen ID.4
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are worried of breaking something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the process.
.
How to change the number plate bulb on your Volkswagen ID.4 without outside access
Second section of our item, replace this license plate bulb on your Volkswagen ID.4 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen ID.4
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen ID.4
Finally last possibility, you must swap the bulb on the backplate of your Volkswagen ID.4, but you are not able to open the cover from the outside of your motor vehicle. In such a case, here is the technique to perform this task:
- Disconnect the battery from your Volkswagen ID.4
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Volkswagen ID.4, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for swapping license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Volkswagen ID.4. If you want to change other bulbs like the position light bulbs on your Volkswagen ID.4 or the low beam bulbs on Volkswagen ID.4, don’t hesitate to read our articles which describe you the process to follow.
Whenever you have any additional questions about the Volkswagen ID.4, do not hesitate to consult our Volkswagen ID.4 category.
