Whether it’s for your own safety, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are in every case operational is necessary. In reality, bulbs are wearing parts that will inevitably burn out in the future and consequently need to be changed. You’re perhaps on this site because one of your parking lights is burnt out and you’re struggling with how to change your Volkswagen Golf 8’s license plate bulb, we’ve written and published this article to help you do it all on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Golf 8.

change-license-plate-bulb-volkswagen-golf-8

How to replace the license plate bulb on your Volkswagen Golf 8 coming from the outside

This approach is the easiest of the two, actually, for this one you will only need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this article content to clarify the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Volkswagen Golf 8. Whether it’s the front or the back of your automobile the operation will be similar.
Here are a few simple guidelines to stick to to conduct this routine service:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Golf 8
  • .

  • Use your screwdriver or knife to eject the bulb from its spot, if you are afraid of breaking something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to validate the successfulness of the task.

How to replace the number plate bulb on your Volkswagen Golf 8 without outside access

Second part of our content page, replace this license plate bulb on your Volkswagen Golf 8 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Volkswagen Golf 8

To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Volkswagen Golf 8

Finally last solution, you must replace the bulb on the backplate of your Volkswagen Golf 8, but you are not able to open the cover from the outside of your automobile. In this case, here is the tactic to execute this task:

  • Disconnect the battery from your Volkswagen Golf 8
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Volkswagen Golf 8, check it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have discovered the main approaches for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to do it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Volkswagen Golf 8. If you need to change other bulbs like the position light bulbs on your Volkswagen Golf 8 or the low beam bulbs on Volkswagen Golf 8, don’t hesitate to browse our articles which demonstrate you the process to follow.

To find more tips on the Volkswagen Golf 8, take a look at the Volkswagen Golf 8 category.