Regardless whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are constantly operational is necessary. Indeed, bulbs are wearing units that will predictably burn out over time and therefore need to be replaced. You’re probably on this website because one of your parking lights is burnt out and you’re wondering how to change your Volkswagen Golf 4’s license plate bulb, we’ve written this article to help you do it without any help and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Golf 4.
How to swap the license plate bulb on your Volkswagen Golf 4 through the outside
This approach is the least difficult of the two, in reality, for this one you will simply need to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this document to describe the method.
So let’s start with changing the number plate bulb by going through the outside of your Volkswagen Golf 4. Regardless whether it’s the front or the back of your automobile the method will be identical.
Here are a few simple guidelines to stick to to execute this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Golf 4
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are worried of destroying a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.
.
How to change the number plate bulb on your Volkswagen Golf 4 without outside access
Second section of our item, swap this license plate bulb on your Volkswagen Golf 4 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen Golf 4
To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen Golf 4
Finally last option, you must swap the bulb on the backplate of your Volkswagen Golf 4, but you simply cannot open the cover from the outside of your automobile. In this case, here is the tactic to conduct this operation:
- Disconnect the battery from your Volkswagen Golf 4
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Volkswagen Golf 4, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main methods for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Volkswagen Golf 4. If you want to change other bulbs like the position light bulbs on your Volkswagen Golf 4 or the low beam bulbs on Volkswagen Golf 4, don’t be reluctant to browse our articles which explain you the operation to follow.
If perhaps you have any additional questions about the Volkswagen Golf 4, do not hesitate to consult our Volkswagen Golf 4 category.
