Regardless it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functioning is extremely important. Indeed, bulbs are wearing parts that will obviously burn out after awhile and therefore need to be replaced. You’re most certainly here because one of your parking lights is burnt out and you’re questioning how to change your Volkswagen Golf 3’s license plate bulb, we’ve made this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Golf 3.
How to swap the license plate bulb on your Volkswagen Golf 3 throughout the outside
This tactic is the most simple of the two, in reality, for this one you will simply need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this article to clarify the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Volkswagen Golf 3. Regardless it’s the front or the back of your motor vehicle the operation will be similar.
Here are a few simple guidelines to follow to carry out this service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Golf 3
- Use your screwdriver or knife to eject the bulb from its place, in the event you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the success of the procedure.
.
How to replace the number plate bulb on your Volkswagen Golf 3 without outside access
Second part of our article, swap this license plate bulb on your Volkswagen Golf 3 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen Golf 3
To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen Golf 3
Finally last solution, you must swap the bulb on the backplate of your Volkswagen Golf 3, but you cannot open the cover from the outside of your motor vehicle. In such a case, here is the approach to carry out this task:
- Unplug the battery from your Volkswagen Golf 3
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Volkswagen Golf 3, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Volkswagen Golf 3. If you desire to change other bulbs like the position light bulbs on your Volkswagen Golf 3 or the low beam bulbs on Volkswagen Golf 3, don’t be reluctant to read our articles which describe you the process to follow.
If you need more tutorials on the Volkswagen Golf 3, go to our Volkswagen Golf 3 category.
