Regardless it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time operational is necessary. Indeed, bulbs are wearing auto parts that will obviously burn out after a while and as a result need to be changed. You’re almost certainly in this article because one of your parking lights is burnt out and you’re struggling with how to change your Volkswagen Golf 2’s license plate bulb, we’ve made this document to help you do it on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Golf 2.

change-license-plate-bulb-volkswagen-golf-2

How to swap the license plate bulb on your Volkswagen Golf 2 through the outside

This process is the quickest of the two, actually, for this one you will simply require to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this article content to show you the way.
So let’s start with swapping the number plate bulb by going through the outside of your Volkswagen Golf 2. Regardless it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple steps to stick to to carry out this service:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Golf 2
  • .

  • Use your screwdriver or knife to remove the bulb from its location, if you are worried of damaging something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to confirm the successfulness of the process.

How to change the number plate bulb on your Volkswagen Golf 2 without outside access

Second part of our content, change this license plate bulb on your Volkswagen Golf 2 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Volkswagen Golf 2

To swap the one on the front plate, nothing could be easier, you will have to put yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much force otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.

How to swap the rear license plate bulb on my Volkswagen Golf 2

Finally last solution, you must swap the bulb on the backplate of your Volkswagen Golf 2, but you cannot open the cover from the outside of your automobile. In this instance, here is the approach to do this operation:

  • Disconnect the battery from your Volkswagen Golf 2
  • Identify the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Volkswagen Golf 2, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main tactics for swapping license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Volkswagen Golf 2. If you need to change other bulbs like the position light bulbs on your Volkswagen Golf 2 or the low beam bulbs on Volkswagen Golf 2, don’t hesitate to browse our content articles which explain you the process to follow.

If you have any additional questions about the Volkswagen Golf 2, do not hesitate to consult our Volkswagen Golf 2 category.