Regardless whether it’s for your own personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are in every case operational is extremely important. In fact, bulbs are wearing units that will inevitably burn out after a while and as a consequence need to be swapped out. You’re almost certainly in this article because one of your parking lights is burnt out and you’re struggling with how to change your Volkswagen Fox’s license plate bulb, we’ve written and published this article content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Fox.
How to swap the license plate bulb on your Volkswagen Fox through the outside
This solution is the easiest of the two, in reality, for this one you will just have to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this article content to explain the approach.
So let’s start with changing the number plate bulb by going through the outside of your Volkswagen Fox. Regardless whether it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple actions to follow to perform this service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Fox
- Use your screwdriver or knife to remove the bulb from its place, in the event that you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Volkswagen Fox without outside access
Second part of our content, replace this license plate bulb on your Volkswagen Fox without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen Fox
To swap the one on the front plate, nothing could be easier, you will have to put yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much pressure otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen Fox
Finally last possibility, you must swap the bulb on the backplate of your Volkswagen Fox, but you cannot really open the cover from the outside of your automobile. In this instance, here is the technique to conduct this operation:
- Unplug the battery from your Volkswagen Fox
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Volkswagen Fox, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Volkswagen Fox. If you desire to change other bulbs like the position light bulbs on your Volkswagen Fox or the low beam bulbs on Volkswagen Fox, don’t be reluctant to consult our articles which demonstrate you the process to follow.
If perhaps you have any further questions about the Volkswagen Fox, do not hesitate to consult our Volkswagen Fox category.
