It doesn’t matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time working is necessary. In reality, bulbs are wearing units that will undoubtedly burn out over the years and as a consequence need to be replaced. You’re most certainly on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Volkswagen Eos’s license plate bulb, we’ve made this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Eos.

change-license-plate-bulb-volkswagen-eos

How to swap the license plate bulb on your Volkswagen Eos throughout the outside

This solution is the easiest of the two, in truth, for this one you will simply require to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this document to describe the method.
So let’s start with swapping the number plate bulb by going through the outside of your Volkswagen Eos. It doesn’t matter if it’s the front or the back of your automobile the method will be similar.
Here are a few simple actions to stick to to conduct this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Eos
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event that you are worried of destroying anything, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to validate the success of the procedure.

How to replace the number plate bulb on your Volkswagen Eos without outside access

Second part of our document, change this license plate bulb on your Volkswagen Eos without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Volkswagen Eos

To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.

How to swap the rear license plate bulb on my Volkswagen Eos

Finally last solution, you must swap the bulb on the backplate of your Volkswagen Eos, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the approach to perform this operation:

  • Disconnect the battery from your Volkswagen Eos
  • Find the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Volkswagen Eos, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Volkswagen Eos. If you desire to change other bulbs like the position light bulbs on your Volkswagen Eos or the low beam bulbs on Volkswagen Eos, don’t hesitate to consult our content articles which demonstrate you the procedure to follow.

If you wish more guides on the Volkswagen Eos, go to our Volkswagen Eos category.