Whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are always functioning is necessary. In fact, bulbs are wearing auto parts that will inevitably burn out over time and therefore need to be changed. You’re probably on this website because one of your parking lights is burnt out and you’re questioning how to change your Volkswagen California’s license plate bulb, we’ve written and published this article content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen California.
How to replace the license plate bulb on your Volkswagen California throughout the outside
This option is the fastest of the two, actually, for this one you will just have to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this content to explain the approach.
So let’s start with changing the number plate bulb by going through the outside of your Volkswagen California. Whether it’s the front or the back of your car the technique will be identical.
Here are a few simple steps to stick to to execute this service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen California
- Use your screwdriver or knife to remove the bulb from its location, in the event that you are scared of breaking anything, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Volkswagen California without outside access
Second section of our content, replace this license plate bulb on your Volkswagen California without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Volkswagen California
To replace the one on the front plate, nothing could be less complicated, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Volkswagen California
Finally last option, you must replace the bulb on the backplate of your Volkswagen California, but you simply cannot open the cover from the outside of your car. In this case, here is the method to do this task:
- Disconnect the battery from your Volkswagen California
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volkswagen California, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main methods for changing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Volkswagen California. If you want to change other bulbs like the position light bulbs on your Volkswagen California or the low beam bulbs on Volkswagen California, don’t be reluctant to read our articles which describe you the process to follow.
To find more tips on the Volkswagen California, take a look at the Volkswagen California category.
