It doesn’t matter if it’s for your specific security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are in every case working is very important. In reality, bulbs are wearing auto parts that will obviously burn out after some time and as a result need to be swapped out. You’re most likely here because one of your parking lights is burnt out and you’re questioning how to change your Volkswagen Beetle’s license plate bulb, we’ve created this article to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Volkswagen Beetle.
How to swap the license plate bulb on your Volkswagen Beetle through the outside
This technique is the easiest of the two, in reality, for this one you will simply require to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this content to describe the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Volkswagen Beetle. It doesn’t matter if it’s the front or the back of your motor vehicle the method will be identical.
Here are a few simple steps to stick to to perform this maintenance tasks:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Beetle
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are afraid of destroying a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the success of the task.
.
How to replace the number plate bulb on your Volkswagen Beetle without outside access
Second section of our item, swap this license plate bulb on your Volkswagen Beetle without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Volkswagen Beetle
To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Volkswagen Beetle
Finally last solution, you must swap the bulb on the backplate of your Volkswagen Beetle, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the method to perform this operation:
- Disconnect the battery from your Volkswagen Beetle
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volkswagen Beetle, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for swapping license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Volkswagen Beetle. If you want to change other bulbs like the position light bulbs on your Volkswagen Beetle or the low beam bulbs on Volkswagen Beetle, don’t hesitate to consult our content articles which demonstrate you the operation to follow.
If you need more tutorials on the Volkswagen Beetle, go to our Volkswagen Beetle category.
