Regardless whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always functional is fundamental. Indeed, bulbs are wearing parts that will predictably burn out over time and therefore need to be changed. You’re quite likely in this article because one of your parking lights is burnt out and you’re worried about how to change your Volkswagen Arteon’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Arteon.
How to change the license plate bulb on your Volkswagen Arteon throughout the outside
This process is the easiest of the two, actually, for this one you will just need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content to describe the way.
So let’s start with replacing the number plate bulb by going through the outside of your Volkswagen Arteon. Regardless whether it’s the front or the back of your motor vehicle the procedure will be identical.
Here are a few simple actions to stick to to carry out this routine service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Arteon
- Use your screwdriver or knife to remove the bulb from its location, in the event you are afraid of damaging a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the achievement of the operation.
.
How to replace the number plate bulb on your Volkswagen Arteon without outside access
Second part of our content page, swap this license plate bulb on your Volkswagen Arteon without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Volkswagen Arteon
To change the one on the front plate, nothing could be less hard, you will have to put yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Volkswagen Arteon
Finally last option, you must change the bulb on the backplate of your Volkswagen Arteon, but you cannot open the cover from the outside of your motor vehicle. In such a case, here is the method to execute this operation:
- Unplug the battery from your Volkswagen Arteon
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volkswagen Arteon, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for replacing license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Volkswagen Arteon. If you wish to change other bulbs like the position light bulbs on your Volkswagen Arteon or the low beam bulbs on Volkswagen Arteon, don’t hesitate to browse our content articles which describe you the procedure to follow.
If you have any additional questions about the Volkswagen Arteon, do not hesitate to consult our Volkswagen Arteon category.
