Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time functional is really important. Indeed, bulbs are wearing units that will surely burn out in the future and consequently need to be swapped out. You’re most likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your Vauxkhall Moka’s license plate bulb, we’ve created this content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Vauxkhall Moka.


How to replace the license plate bulb on your Vauxkhall Moka through the outside

This approach is the quickest of the two, actually, for this one you will just require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this content to clarify the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Vauxkhall Moka. Regardless whether it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple guidelines to stick to to conduct this maintenance tasks:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Vauxkhall Moka
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event that you are worried of breaking anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to confirm the achievement of the task.

How to replace the number plate bulb on your Vauxkhall Moka without outside access

Second section of our document, swap this license plate bulb on your Vauxkhall Moka without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Vauxkhall Moka

To replace the one on the front plate, nothing could be easier, you will have to put yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much pressure or you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Vauxkhall Moka

Finally last solution, you must replace the bulb on the backplate of your Vauxkhall Moka, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the solution to operate this task:

  • Unplug the battery from your Vauxkhall Moka
  • Identify the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Vauxkhall Moka, test it and reassemble it, paying attention to the clips on the trunk liner

There you have it, you have discovered the main approaches for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the outline of this article. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Vauxkhall Moka. If you wish to change other bulbs like the position light bulbs on your Vauxkhall Moka or the low beam bulbs on Vauxkhall Moka, don’t hesitate to consult our articles which explain you the procedure to follow.

To get more tips on the Vauxkhall Moka, take a look at the Vauxkhall Moka category.