Whether it’s for your specific security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly effective is very important. In fact, bulbs are wearing parts that will obviously burn out after awhile and as a consequence need to be changed. You’re probably on the website because one of your parking lights is burnt out and you’re wanting to know how to change your Toyota Prius 2’s license plate bulb, we’ve written and published this content to help you do it by yourself and not have to go to your mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota Prius 2.
How to change the license plate bulb on your Toyota Prius 2 throughout the outside
This solution is the easiest of the two, actually, for this one you will only need to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content page to describe the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Toyota Prius 2. Whether it’s the front or the back of your car the process will be the same.
Here are a few simple actions to stick to to conduct this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Prius 2
- Use your screwdriver or knife to remove the bulb from its placement, in the event you are scared of breaking anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the successfulness of the task.
.
How to change the number plate bulb on your Toyota Prius 2 without outside access
Second part of our article, replace this license plate bulb on your Toyota Prius 2 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota Prius 2
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota Prius 2
Finally last possibility, you must change the bulb on the backplate of your Toyota Prius 2, but you cannot really open the cover from the outside of your car. In this case, here is the solution to operate this operation:
- Unplug the battery from your Toyota Prius 2
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Toyota Prius 2, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Toyota Prius 2. If you want to change other bulbs like the position light bulbs on your Toyota Prius 2 or the low beam bulbs on Toyota Prius 2, don’t be reluctant to read our content articles which describe you the procedure to follow.
If perhaps you have any further questions about the Toyota Prius 2, do not hesitate to consult our Toyota Prius 2 category.
