Regardless it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time functional is fundamental. Indeed, bulbs are wearing units that will inevitably burn out after a while and as a result need to be swapped out. You’re almost certainly on this site because one of your parking lights is burnt out and you’re wondering how to change your Toyota Iq’s license plate bulb, we’ve made this content page to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota Iq.
How to replace the license plate bulb on your Toyota Iq throughout the outside
This method is the simplest of the two, in truth, for this one you will just need to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this document to describe the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Toyota Iq. Regardless it’s the front or the back of your motor vehicle the method will be similar.
Here are a few simple actions to follow to conduct this service:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Iq
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are afraid of damaging something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the procedure.
.
How to change the number plate bulb on your Toyota Iq without outside access
Second section of our content page, swap this license plate bulb on your Toyota Iq without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Toyota Iq
To replace the one on the front plate, nothing could be simpler, you will have to position yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Toyota Iq
Finally last solution, you must replace the bulb on the backplate of your Toyota Iq, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the process to conduct this task:
- Unplug the battery from your Toyota Iq
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Toyota Iq, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main methods for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Toyota Iq. If you desire to change other bulbs like the position light bulbs on your Toyota Iq or the low beam bulbs on Toyota Iq, don’t hesitate to read our articles which describe you the operation to follow.
To discover more tips on the Toyota Iq, take a look at the Toyota Iq category.
