Regardless whether it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always operational is fundamental. In fact, bulbs are wearing auto parts that will predictably burn out in the future and consequently need to be replaced. You’re most likely on this website because one of your parking lights is burnt out and you’re questioning how to change your Toyota Hilux’s license plate bulb, we’ve written and published this document to help you do it by yourself and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Toyota Hilux.
How to change the license plate bulb on your Toyota Hilux throughout the outside
This tactic is the easiest of the two, in reality, for this one you will just need to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this article to clarify the way.
So let’s begin with swapping the number plate bulb by going through the outside of your Toyota Hilux. Regardless whether it’s the front or the back of your car the operation will be similar.
Here are a few simple guidelines to stick to to carry out this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Hilux
- Use your screwdriver or knife to remove the bulb from its place, in the event that you are scared of destroying anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the achievement of the process.
.
How to change the number plate bulb on your Toyota Hilux without outside access
Second part of our article, replace this license plate bulb on your Toyota Hilux without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota Hilux
To change the one on the front plate, nothing could be easier, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much pressure or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota Hilux
Finally last option, you must change the bulb on the backplate of your Toyota Hilux, but you simply cannot open the cover from the outside of your car. In this instance, here is the tactic to perform this task:
- Unplug the battery from your Toyota Hilux
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Toyota Hilux, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for swapping license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Toyota Hilux. If you need to change other bulbs like the position light bulbs on your Toyota Hilux or the low beam bulbs on Toyota Hilux, don’t be reluctant to consult our content articles which explain you the procedure to follow.
In the event that you have any further questions about the Toyota Hilux, do not hesitate to consult our Toyota Hilux category.
