Regardless it’s for your specific security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are all the time operational is necessary. Indeed, bulbs are wearing auto parts that will predictably burn out after some time and as a consequence need to be swapped out. You’re quite likely in this article because one of your parking lights is burnt out and you’re worried about how to change your Toyota Hilux 3’s license plate bulb, we’ve created this content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota Hilux 3.
How to change the license plate bulb on your Toyota Hilux 3 through the outside
This tactic is the least difficult of the two, actually, for this one you will just need to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this content page to clarify the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Toyota Hilux 3. Regardless it’s the front or the back of your vehicle the procedure will be the same.
Here are a few simple actions to follow to conduct this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Hilux 3
- Use your screwdriver or knife to eject the bulb from its location, if you are scared of damaging something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the successfulness of the task.
.
How to replace the number plate bulb on your Toyota Hilux 3 without outside access
Second part of our content page, swap this license plate bulb on your Toyota Hilux 3 without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota Hilux 3
To change the one on the front plate, nothing could be less hard, you will have to position yourself under the vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota Hilux 3
Finally last option, you must change the bulb on the backplate of your Toyota Hilux 3, but you cannot open the cover from the outside of your vehicle. In this case, here is the method to operate this task:
- Unplug the battery from your Toyota Hilux 3
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Toyota Hilux 3, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Toyota Hilux 3. If you want to change other bulbs like the position light bulbs on your Toyota Hilux 3 or the low beam bulbs on Toyota Hilux 3, don’t be reluctant to browse our articles which demonstrate you the procedure to follow.
To find more tips on the Toyota Hilux 3, take a look at the Toyota Hilux 3 category.
