Whether it’s for your own personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case operational is very important. Indeed, bulbs are wearing parts that will predictably burn out as time passes and as a consequence need to be changed. You’re likely on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Toyota Highlander’s license plate bulb, we’ve created this document to help you do it on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Toyota Highlander.
How to change the license plate bulb on your Toyota Highlander through the outside
This process is the least difficult of the two, in truth, for this one you will simply require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this content to describe the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Toyota Highlander. Whether it’s the front or the back of your motor vehicle the technique will be similar.
Here are a few simple steps to stick to to conduct this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Highlander
- Use your screwdriver or knife to eject the bulb from its location, in the event you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the success of the task.
.
How to replace the number plate bulb on your Toyota Highlander without outside access
Second section of our item, swap this license plate bulb on your Toyota Highlander without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota Highlander
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take out the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much pressure otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota Highlander
Finally last option, you must change the bulb on the backplate of your Toyota Highlander, but you cannot really open the cover from the outside of your motor vehicle. In this instance, here is the method to conduct this task:
- Unplug the battery from your Toyota Highlander
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Toyota Highlander, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to do it following the outline of this article. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Toyota Highlander. If you desire to change other bulbs like the position light bulbs on your Toyota Highlander or the low beam bulbs on Toyota Highlander, don’t hesitate to consult our content articles which describe you the operation to follow.
To find more tips on the Toyota Highlander, take a look at the Toyota Highlander category.
