Whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are in every case functional is very important. Indeed, bulbs are wearing parts that will obviously burn out after some time and as a consequence need to be changed. You’re almost certainly here because one of your parking lights is burnt out and you’re worried about how to change your Toyota FJ Cruiser’s license plate bulb, we’ve written this content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Toyota FJ Cruiser.
How to change the license plate bulb on your Toyota FJ Cruiser throughout the outside
This method is the least difficult of the two, in truth, for this one you will only require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content to describe the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Toyota FJ Cruiser. Whether it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple steps to follow to perform this maintenance tasks:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota FJ Cruiser
- Use your screwdriver or knife to remove the bulb from its placement, if you are afraid of destroying a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the operation.
.
How to change the number plate bulb on your Toyota FJ Cruiser without outside access
Second part of our document, replace this license plate bulb on your Toyota FJ Cruiser without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota FJ Cruiser
To change the one on the front plate, nothing could be less hard, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much force or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota FJ Cruiser
Finally last possibility, you must change the bulb on the backplate of your Toyota FJ Cruiser, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the method to perform this operation:
- Disconnect the battery from your Toyota FJ Cruiser
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Toyota FJ Cruiser, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for replacing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Toyota FJ Cruiser. If you want to change other bulbs like the position light bulbs on your Toyota FJ Cruiser or the low beam bulbs on Toyota FJ Cruiser, don’t be reluctant to browse our content articles which explain you the procedure to follow.
If you need more tutorials on the Toyota FJ Cruiser, go to our Toyota FJ Cruiser category.
