Whether it’s for your own safety, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are all the time operational is necessary. In reality, bulbs are wearing parts that will predictably burn out over time and as a result need to be swapped out. You’re most certainly here because one of your parking lights is burnt out and you’re questioning how to change your Toyota Corolla Verso’s license plate bulb, we’ve made this document to help you do it all on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota Corolla Verso.

change-license-plate-bulb-toyota-corolla-verso

How to change the license plate bulb on your Toyota Corolla Verso through the outside

This technique is the least difficult of the two, in fact, for this one you will only need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this document to demonstrate the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Toyota Corolla Verso. Whether it’s the front or the back of your car the method will be similar.
Here are a few simple guidelines to stick to to carry out this maintenance tasks:

  • With the engine turned off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Corolla Verso
  • .

  • Use your screwdriver or knife to remove the bulb from its place, in the event you are scared of destroying anything, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the operation.

How to replace the number plate bulb on your Toyota Corolla Verso without outside access

Second part of our content, swap this license plate bulb on your Toyota Corolla Verso without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Toyota Corolla Verso

To change the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much force otherwise you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.

How to change the rear license plate bulb on my Toyota Corolla Verso

Finally last solution, you must change the bulb on the backplate of your Toyota Corolla Verso, but you simply cannot open the cover from the outside of your car. In this instance, here is the process to perform this operation:

  • Disconnect the battery from your Toyota Corolla Verso
  • Identify the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Toyota Corolla Verso, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main approaches for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Toyota Corolla Verso. If you want to change other bulbs like the position light bulbs on your Toyota Corolla Verso or the low beam bulbs on Toyota Corolla Verso, don’t be reluctant to read our content articles which explain you the operation to follow.

If you have any further questions about the Toyota Corolla Verso, do not hesitate to consult our Toyota Corolla Verso category.