It doesn’t matter if it’s for your own personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always effective is very important. Indeed, bulbs are wearing parts that will surely burn out as time passes and as a result need to be swapped out. You’re most certainly on the website because one of your parking lights is burnt out and you’re questioning how to change your Toyota Avalon’s license plate bulb, we’ve created this article to help you do it by yourself and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota Avalon.
How to replace the license plate bulb on your Toyota Avalon through the outside
This solution is the most simple of the two, in fact, for this one you will simply require to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second section of this content page to describe the method.
So let’s start with replacing the number plate bulb by going through the outside of your Toyota Avalon. It doesn’t matter if it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple actions to stick to to perform this service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Avalon
- Use your screwdriver or knife to eject the bulb from its spot, if you are worried of breaking something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the successfulness of the task.
.
How to change the number plate bulb on your Toyota Avalon without outside access
Second section of our content page, replace this license plate bulb on your Toyota Avalon without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Toyota Avalon
To replace the one on the front plate, nothing could be much easier, you will have to position yourself under the automobile (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Toyota Avalon
Finally last solution, you must replace the bulb on the backplate of your Toyota Avalon, but you are not able to open the cover from the outside of your automobile. In such a case, here is the method to accomplish this task:
- Unplug the battery from your Toyota Avalon
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Toyota Avalon, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main ways for replacing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Toyota Avalon. If you need to change other bulbs like the position light bulbs on your Toyota Avalon or the low beam bulbs on Toyota Avalon, don’t be reluctant to browse our content articles which explain you the process to follow.
In the event that you have any further questions about the Toyota Avalon, do not hesitate to consult our Toyota Avalon category.
