Whether it’s for your own personal security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are always functional is necessary. In fact, bulbs are wearing parts that will undoubtedly burn out over the years and therefore need to be changed. You’re most certainly on this website because one of your parking lights is burnt out and you’re questioning how to change your Toyota Auris 2’s license plate bulb, we’ve written and published this document to help you do it all on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota Auris 2.
How to change the license plate bulb on your Toyota Auris 2 coming from the outside
This approach is the simplest of the two, in fact, for this one you will only need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this content page to explain the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Toyota Auris 2. Whether it’s the front or the back of your automobile the method will be the same.
Here are a few simple steps to follow to carry out this service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Auris 2
- Use your screwdriver or knife to remove the bulb from its placement, in the event that you are worried of breaking something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the procedure.
.
How to replace the number plate bulb on your Toyota Auris 2 without outside access
Second part of our article, swap this license plate bulb on your Toyota Auris 2 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota Auris 2
To change the one on the front plate, nothing could be easier, you will have to put yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota Auris 2
Finally last solution, you must change the bulb on the backplate of your Toyota Auris 2, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the approach to conduct this task:
- Disconnect the battery from your Toyota Auris 2
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Toyota Auris 2, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main approaches for replacing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Toyota Auris 2. If you need to change other bulbs like the position light bulbs on your Toyota Auris 2 or the low beam bulbs on Toyota Auris 2, don’t be reluctant to consult our articles which demonstrate you the operation to follow.
If you want more tutorials on the Toyota Auris 2, go to our Toyota Auris 2 category.
