Whether it’s for your personal security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time working is fundamental. Indeed, bulbs are wearing units that will predictably burn out in the future and as a consequence need to be changed. You’re probably on the website because one of your parking lights is burnt out and you’re struggling with how to change your Toyota 86’s license plate bulb, we’ve made this content page to help you do it by yourself and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Toyota 86.
How to replace the license plate bulb on your Toyota 86 through the outside
This approach is the fastest of the two, in reality, for this one you will just need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this article to clarify the way.
So let’s start with swapping the number plate bulb by going through the outside of your Toyota 86. Whether it’s the front or the back of your car the process will be identical.
Here are a few simple actions to follow to execute this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota 86
- Use your screwdriver or knife to eject the bulb from its spot, in the event that you are worried of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the success of the process.
.
How to change the number plate bulb on your Toyota 86 without outside access
Second part of our article, change this license plate bulb on your Toyota 86 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Toyota 86
To replace the one on the front plate, nothing could be less complicated, you will have to put yourself under the car (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Toyota 86
Finally last solution, you must replace the bulb on the backplate of your Toyota 86, but you simply cannot open the cover from the outside of your car. In such a case, here is the tactic to carry out this operation:
- Disconnect the battery from your Toyota 86
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Toyota 86, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Toyota 86. If you desire to change other bulbs like the position light bulbs on your Toyota 86 or the low beam bulbs on Toyota 86, don’t be reluctant to browse our articles which explain you the process to follow.
In the event that you have any further questions about the Toyota 86, do not hesitate to consult our Toyota 86 category.
