It doesn’t matter if it’s for your specific safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are all the time effective is extremely important. In reality, bulbs are wearing auto parts that will obviously burn out with time and as a result need to be replaced. You’re probably on this site because one of your parking lights is burnt out and you’re struggling with how to change your Suzuki Grand Vitara’s license plate bulb, we’ve made this content to help you do it by yourself and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Suzuki Grand Vitara.
How to change the license plate bulb on your Suzuki Grand Vitara through the outside
This option is the simplest of the two, in reality, for this one you will only have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this article to explain the approach.
So let’s start with changing the number plate bulb by going through the outside of your Suzuki Grand Vitara. It doesn’t matter if it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple guidelines to follow to carry out this routine service:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Suzuki Grand Vitara
- Use your screwdriver or knife to remove the bulb from its place, if you are worried of breaking a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the task.
.
How to change the number plate bulb on your Suzuki Grand Vitara without outside access
Second section of our document, swap this license plate bulb on your Suzuki Grand Vitara without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Suzuki Grand Vitara
To change the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Suzuki Grand Vitara
Finally last option, you must change the bulb on the backplate of your Suzuki Grand Vitara, but you are not able to open the cover from the outside of your automobile. In this case, here is the technique to conduct this operation:
- Unplug the battery from your Suzuki Grand Vitara
- Identify the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Suzuki Grand Vitara, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main ways for changing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to do it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Suzuki Grand Vitara. If you want to change other bulbs like the position light bulbs on your Suzuki Grand Vitara or the low beam bulbs on Suzuki Grand Vitara, don’t be reluctant to consult our articles which explain you the operation to follow.
If you need more tutorials on the Suzuki Grand Vitara, go to our Suzuki Grand Vitara category.
