It doesn’t matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are constantly operational is very important. In fact, bulbs are wearing auto parts that will inevitably burn out over the years and as a result need to be changed. You’re probably on the website because one of your parking lights is burnt out and you’re worried about how to change your Subaru Impreza’s license plate bulb, we’ve made this article content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Subaru Impreza.

change-license-plate-bulb-subaru-impreza

How to replace the license plate bulb on your Subaru Impreza coming from the outside

This approach is the quickest of the two, in fact, for this one you will just need to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this content page to describe the way.
So let’s begin with changing the number plate bulb by going through the outside of your Subaru Impreza. It doesn’t matter if it’s the front or the back of your motor vehicle the process will be the same.
Here are a few simple guidelines to follow to carry out this maintenance tasks:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Subaru Impreza
  • .

  • Use your screwdriver or knife to remove the bulb from its placement, in the event you are scared of breaking something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to validate the achievement of the procedure.

How to replace the number plate bulb on your Subaru Impreza without outside access

Second part of our document, replace this license plate bulb on your Subaru Impreza without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Subaru Impreza

To replace the one on the front plate, nothing could be easier, you will have to put yourself under the motor vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force or you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.

How to replace the rear license plate bulb on my Subaru Impreza

Finally last option, you must replace the bulb on the backplate of your Subaru Impreza, but you are not able to open the cover from the outside of your motor vehicle. In such a case, here is the tactic to carry out this operation:

  • Unplug the battery from your Subaru Impreza
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Subaru Impreza, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main techniques for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Subaru Impreza. If you desire to change other bulbs like the position light bulbs on your Subaru Impreza or the low beam bulbs on Subaru Impreza, don’t be reluctant to consult our content articles which demonstrate you the procedure to follow.

To discover more tips on the Subaru Impreza, take a look at the Subaru Impreza category.