Regardless it’s for your own personal security, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case functional is necessary. In reality, bulbs are wearing parts that will obviously burn out after some time and as a result need to be replaced. You’re most likely on this site because one of your parking lights is burnt out and you’re wanting to know how to change your Subaru Forester’s license plate bulb, we’ve made this article to help you do it by yourself and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Subaru Forester.

change-license-plate-bulb-subaru-forester

How to change the license plate bulb on your Subaru Forester coming from the outside

This solution is the most simple of the two, in truth, for this one you will simply need to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this content page to describe the way.
So let’s begin with changing the number plate bulb by going through the outside of your Subaru Forester. Regardless it’s the front or the back of your motor vehicle the operation will be similar.
Here are a few simple actions to stick to to execute this maintenance tasks:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Subaru Forester
  • .

  • Use your screwdriver or knife to remove the bulb from its placement, in the event that you are worried of damaging something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the operation.

How to replace the number plate bulb on your Subaru Forester without outside access

Second part of our document, change this license plate bulb on your Subaru Forester without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Subaru Forester

To change the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much pressure or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.

How to change the rear license plate bulb on my Subaru Forester

Finally last option, you must change the bulb on the backplate of your Subaru Forester, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the process to operate this operation:

  • Unplug the battery from your Subaru Forester
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Subaru Forester, verify it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main methods for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Subaru Forester. If you wish to change other bulbs like the position light bulbs on your Subaru Forester or the low beam bulbs on Subaru Forester, don’t be reluctant to browse our content articles which explain you the procedure to follow.

To discover more tips on the Subaru Forester, take a look at the Subaru Forester category.