Regardless whether it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always operational is really important. Indeed, bulbs are wearing units that will undoubtedly burn out after awhile and therefore need to be replaced. You’re quite likely here because one of your parking lights is burnt out and you’re wanting to know how to change your smart fortwo’s license plate bulb, we’ve created this article content to help you do it all on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your smart fortwo.
How to change the license plate bulb on your smart fortwo through the outside
This method is the quickest of the two, in truth, for this one you will just require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this document to teach you the way.
So let’s start with swapping the number plate bulb by going through the outside of your smart fortwo. Regardless whether it’s the front or the back of your automobile the process will be identical.
Here are a few simple steps to follow to carry out this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your smart fortwo
- Use your screwdriver or knife to eject the bulb from its place, if you are worried of breaking anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to replace the number plate bulb on your smart fortwo without outside access
Second section of our document, replace this license plate bulb on your smart fortwo without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my smart fortwo
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my smart fortwo
Finally last possibility, you must change the bulb on the backplate of your smart fortwo, but you simply cannot open the cover from the outside of your automobile. In this instance, here is the process to carry out this operation:
- Disconnect the battery from your smart fortwo
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your smart fortwo, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for swapping license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your smart fortwo. If you desire to change other bulbs like the position light bulbs on your smart fortwo or the low beam bulbs on smart fortwo, don’t be reluctant to consult our articles which explain you the process to follow.
If you wish more guides on the smart fortwo, go to our smart fortwo category.
