Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are in every case operational is necessary. In reality, bulbs are wearing units that will obviously burn out after awhile and as a consequence need to be swapped out. You’re probably on this site because one of your parking lights is burnt out and you’re worried about how to change your skoda yeti’s license plate bulb, we’ve written this document to help you do it by yourself and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your skoda yeti.
How to change the license plate bulb on your skoda yeti coming from the outside
This tactic is the most simple of the two, in truth, for this one you will simply require to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this document to teach you the method.
So let’s begin with changing the number plate bulb by going through the outside of your skoda yeti. Regardless it’s the front or the back of your car the method will be the same.
Here are a few simple actions to follow to conduct this routine service:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your skoda yeti
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are worried of breaking anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the success of the operation.
.
How to replace the number plate bulb on your skoda yeti without outside access
Second section of our article, change this license plate bulb on your skoda yeti without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my skoda yeti
To change the one on the front plate, nothing could be less hard, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my skoda yeti
Finally last option, you must change the bulb on the backplate of your skoda yeti, but you cannot open the cover from the outside of your car. In this instance, here is the technique to accomplish this task:
- Unplug the battery from your skoda yeti
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your skoda yeti, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your skoda yeti. If you desire to change other bulbs like the position light bulbs on your skoda yeti or the low beam bulbs on skoda yeti, don’t hesitate to browse our content articles which demonstrate you the operation to follow.
To discover more tips on the skoda yeti, take a look at the skoda yeti category.
