Whether it’s for your own security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are constantly functional is really important. In reality, bulbs are wearing auto parts that will surely burn out with time and consequently need to be changed. You’re almost certainly on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Skoda Kodiaq’s license plate bulb, we’ve created this content to help you do it by yourself and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Skoda Kodiaq.
How to change the license plate bulb on your Skoda Kodiaq throughout the outside
This approach is the most simple of the two, actually, for this one you will simply require to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this document to describe the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Skoda Kodiaq. Whether it’s the front or the back of your vehicle the process will be similar.
Here are a few simple actions to stick to to conduct this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Skoda Kodiaq
- Use your screwdriver or knife to remove the bulb from its placement, if you are scared of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the success of the procedure.
.
How to change the number plate bulb on your Skoda Kodiaq without outside access
Second part of our item, swap this license plate bulb on your Skoda Kodiaq without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Skoda Kodiaq
To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Skoda Kodiaq
Finally last option, you must change the bulb on the backplate of your Skoda Kodiaq, but you cannot open the cover from the outside of your vehicle. In such a case, here is the method to accomplish this operation:
- Disconnect the battery from your Skoda Kodiaq
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Skoda Kodiaq, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for swapping license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Skoda Kodiaq. If you need to change other bulbs like the position light bulbs on your Skoda Kodiaq or the low beam bulbs on Skoda Kodiaq, don’t hesitate to browse our content articles which explain you the process to follow.
If you wish more guides on the Skoda Kodiaq, go to our Skoda Kodiaq category.
