Whether it’s for your personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case operational is really important. In reality, bulbs are wearing units that will obviously burn out in the future and consequently need to be replaced. You’re most likely on this website because one of your parking lights is burnt out and you’re wondering how to change your Skoda Karoq’s license plate bulb, we’ve made this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Skoda Karoq.

change-license-plate-bulb-skoda-karoq

How to change the license plate bulb on your Skoda Karoq through the outside

This method is the easiest of the two, actually, for this one you will only require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this content to teach you the method.
So let’s start with changing the number plate bulb by going through the outside of your Skoda Karoq. Whether it’s the front or the back of your motor vehicle the technique will be the same.
Here are a few simple guidelines to follow to perform this maintenance:

  • With the engine turned off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Skoda Karoq
  • .

  • Use your screwdriver or knife to remove the bulb from its place, if you are scared of breaking a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to validate the successfulness of the procedure.

How to change the number plate bulb on your Skoda Karoq without outside access

Second part of our content, swap this license plate bulb on your Skoda Karoq without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Skoda Karoq

To change the one on the front plate, nothing could be less difficult, you will have to position yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much pressure or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Skoda Karoq

Finally last solution, you must change the bulb on the backplate of your Skoda Karoq, but you cannot really open the cover from the outside of your motor vehicle. In this case, here is the solution to accomplish this task:

  • Disconnect the battery from your Skoda Karoq
  • Find the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Skoda Karoq, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main ways for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Skoda Karoq. If you need to change other bulbs like the position light bulbs on your Skoda Karoq or the low beam bulbs on Skoda Karoq, don’t hesitate to browse our articles which describe you the procedure to follow.

To get more tips on the Skoda Karoq, take a look at the Skoda Karoq category.