Regardless it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are in every case working is fundamental. Indeed, bulbs are wearing auto parts that will surely burn out after some time and as a consequence need to be swapped out. You’re almost certainly in this article because one of your parking lights is burnt out and you’re wondering how to change your Seat Tarraco’s license plate bulb, we’ve created this content to help you do it by yourself and not have to go to your auto mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Seat Tarraco.

change-license-plate-bulb-seat-tarraco

How to change the license plate bulb on your Seat Tarraco coming from the outside

This tactic is the simplest of the two, in truth, for this one you will just need to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second section of this article content to describe the method.
So let’s start with swapping the number plate bulb by going through the outside of your Seat Tarraco. Regardless it’s the front or the back of your automobile the procedure will be identical.
Here are a few simple guidelines to stick to to execute this maintenance tasks:

  • With the engine turned off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Seat Tarraco
  • .

  • Use your screwdriver or knife to remove the bulb from its place, in the event that you are afraid of breaking anything, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to confirm the success of the operation.

How to replace the number plate bulb on your Seat Tarraco without outside access

Second section of our content page, swap this license plate bulb on your Seat Tarraco without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Seat Tarraco

To change the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force or you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.

How to change the rear license plate bulb on my Seat Tarraco

Finally last option, you must change the bulb on the backplate of your Seat Tarraco, but you cannot open the cover from the outside of your automobile. In this case, here is the method to carry out this task:

  • Unplug the battery from your Seat Tarraco
  • Identify the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Seat Tarraco, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have found out the main solutions for swapping license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to realize it following the outline of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Seat Tarraco. If you need to change other bulbs like the position light bulbs on your Seat Tarraco or the low beam bulbs on Seat Tarraco, don’t be reluctant to read our content articles which demonstrate you the process to follow.

Whenever you have any additional questions about the Seat Tarraco, do not hesitate to consult our Seat Tarraco category.