Whether it’s for your specific security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are in every case functional is really important. Indeed, bulbs are wearing parts that will predictably burn out with time and as a result need to be changed. You’re most likely in this article because one of your parking lights is burnt out and you’re wondering how to change your Renualt Express’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renualt Express.
How to swap the license plate bulb on your Renualt Express through the outside
This method is the least difficult of the two, in truth, for this one you will only require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this content page to clarify the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Renualt Express. Whether it’s the front or the back of your vehicle the process will be similar.
Here are a few simple actions to follow to perform this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renualt Express
- Use your screwdriver or knife to remove the bulb from its location, in the event you are scared of breaking anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the achievement of the procedure.
.
How to change the number plate bulb on your Renualt Express without outside access
Second part of our item, change this license plate bulb on your Renualt Express without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Renualt Express
To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much force or you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Renualt Express
Finally last option, you must swap the bulb on the backplate of your Renualt Express, but you cannot really open the cover from the outside of your vehicle. In such a case, here is the technique to perform this task:
- Disconnect the battery from your Renualt Express
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Renualt Express, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for swapping license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Renualt Express. If you want to change other bulbs like the position light bulbs on your Renualt Express or the low beam bulbs on Renualt Express, don’t hesitate to consult our content articles which demonstrate you the process to follow.
If perhaps you have any additional questions about the Renualt Express, do not hesitate to consult our Renualt Express category.
