It doesn’t matter if it’s for your own security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are in every case effective is extremely important. In reality, bulbs are wearing auto parts that will obviously burn out over time and as a consequence need to be swapped out. You’re almost certainly on this website because one of your parking lights is burnt out and you’re worried about how to change your Renault Vel Satis’s license plate bulb, we’ve created this content to help you do it without any help and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Vel Satis.
How to replace the license plate bulb on your Renault Vel Satis throughout the outside
This technique is the least difficult of the two, in truth, for this one you will only need to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second part of this content page to explain the way.
So let’s start with replacing the number plate bulb by going through the outside of your Renault Vel Satis. It doesn’t matter if it’s the front or the back of your motor vehicle the procedure will be identical.
Here are a few simple actions to stick to to perform this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Vel Satis
- Use your screwdriver or knife to eject the bulb from its location, in the event you are worried of damaging something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the achievement of the process.
.
How to replace the number plate bulb on your Renault Vel Satis without outside access
Second part of our content page, swap this license plate bulb on your Renault Vel Satis without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Renault Vel Satis
To replace the one on the front plate, nothing could be less complicated, you will have to put yourself under the motor vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to exert too much pressure or you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Renault Vel Satis
Finally last option, you must replace the bulb on the backplate of your Renault Vel Satis, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the tactic to execute this operation:
- Unplug the battery from your Renault Vel Satis
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Vel Satis, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Renault Vel Satis. If you want to change other bulbs like the position light bulbs on your Renault Vel Satis or the low beam bulbs on Renault Vel Satis, don’t hesitate to consult our content articles which demonstrate you the operation to follow.
If you wish more guides on the Renault Vel Satis, go to our Renault Vel Satis category.
