Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are in every case functioning is very important. In reality, bulbs are wearing units that will obviously burn out over time and as a result need to be swapped out. You’re probably on the website because one of your parking lights is burnt out and you’re questioning how to change your Renault Twingo 3’s license plate bulb, we’ve made this content page to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Twingo 3.

change-license-plate-bulb-renault-twingo-3

How to swap the license plate bulb on your Renault Twingo 3 through the outside

This process is the simplest of the two, in truth, for this one you will only need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second part of this article content to describe the method.
So let’s start with changing the number plate bulb by going through the outside of your Renault Twingo 3. Regardless it’s the front or the back of your car the process will be identical.
Here are a few simple actions to follow to conduct this maintenance:

  • With the engine off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Twingo 3
  • .

  • Use your screwdriver or knife to eject the bulb from its location, in the event that you are worried of destroying anything, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to validate the success of the task.

How to change the number plate bulb on your Renault Twingo 3 without outside access

Second part of our item, replace this license plate bulb on your Renault Twingo 3 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Renault Twingo 3

To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.

How to swap the rear license plate bulb on my Renault Twingo 3

Finally last option, you must swap the bulb on the backplate of your Renault Twingo 3, but you cannot really open the cover from the outside of your car. In such a case, here is the technique to conduct this task:

  • Unplug the battery from your Renault Twingo 3
  • Find the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Renault Twingo 3, verify it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have found out the main solutions for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Renault Twingo 3. If you need to change other bulbs like the position light bulbs on your Renault Twingo 3 or the low beam bulbs on Renault Twingo 3, don’t be reluctant to consult our content articles which explain you the procedure to follow.

If you have any additional questions about the Renault Twingo 3, do not hesitate to consult our Renault Twingo 3 category.