Regardless it’s for your own personal safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are in every case functioning is very important. Indeed, bulbs are wearing units that will inevitably burn out over time and consequently need to be replaced. You’re almost certainly on the website because one of your parking lights is burnt out and you’re wondering how to change your Renault Talisman’s license plate bulb, we’ve written and published this content page to help you do it without any help and not have to go to your technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Talisman.

change-license-plate-bulb-renault-talisman

How to replace the license plate bulb on your Renault Talisman throughout the outside

This solution is the simplest of the two, in reality, for this one you will only require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this content to describe the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Renault Talisman. Regardless it’s the front or the back of your motor vehicle the process will be similar.
Here are a few simple guidelines to stick to to carry out this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Talisman
  • .

  • Use your screwdriver or knife to remove the bulb from its place, if you are afraid of damaging a thing, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to confirm the achievement of the operation.

How to change the number plate bulb on your Renault Talisman without outside access

Second part of our article, replace this license plate bulb on your Renault Talisman without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Renault Talisman

To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the motor vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.

How to replace the rear license plate bulb on my Renault Talisman

Finally last possibility, you must replace the bulb on the backplate of your Renault Talisman, but you cannot open the cover from the outside of your motor vehicle. In this case, here is the solution to accomplish this task:

  • Disconnect the battery from your Renault Talisman
  • Locate the location of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once found, before removing the bulb holders, disconnect the holders for less complicated access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Renault Talisman, check it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have discovered the main ways for replacing license plate bulbs on your car, bear in mind that on some models the technique may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Renault Talisman. If you desire to change other bulbs like the position light bulbs on your Renault Talisman or the low beam bulbs on Renault Talisman, don’t be reluctant to consult our content articles which explain you the process to follow.

To find more tips on the Renault Talisman, take a look at the Renault Talisman category.