Whether it’s for your personal security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are in every case effective is fundamental. In reality, bulbs are wearing parts that will inevitably burn out with time and as a consequence need to be swapped out. You’re likely in this article because one of your parking lights is burnt out and you’re wanting to know how to change your Renault Megane’s license plate bulb, we’ve made this content to help you do it without any help and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Megane.

change-license-plate-bulb-renault-megane

How to replace the license plate bulb on your Renault Megane through the outside

This solution is the quickest of the two, in truth, for this one you will just need to take away the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second section of this article content to describe the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Renault Megane. Whether it’s the front or the back of your motor vehicle the process will be similar.
Here are a few simple guidelines to follow to execute this maintenance tasks:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Megane
  • .

  • Use your screwdriver or knife to eject the bulb from its place, in the event you are afraid of destroying something, you can as well do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and check the light to validate the achievement of the task.

How to replace the number plate bulb on your Renault Megane without outside access

Second section of our document, change this license plate bulb on your Renault Megane without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Renault Megane

To replace the one on the front plate, nothing could be less difficult, you will have to put yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much force otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Renault Megane

Finally last option, you must replace the bulb on the backplate of your Renault Megane, but you simply cannot open the cover from the outside of your motor vehicle. In this case, here is the solution to conduct this task:

  • Unplug the battery from your Renault Megane
  • Locate the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Renault Megane, check it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Renault Megane. If you desire to change other bulbs like the position light bulbs on your Renault Megane or the low beam bulbs on Renault Megane, don’t be reluctant to consult our content articles which describe you the procedure to follow.

If you want more guides on the Renault Megane, go to our Renault Megane category.