Regardless whether it’s for your specific security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are all the time functioning is extremely important. Indeed, bulbs are wearing units that will inevitably burn out over the years and consequently need to be replaced. You’re likely on the website because one of your parking lights is burnt out and you’re struggling with how to change your Renault Megane 4’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Megane 4.
How to replace the license plate bulb on your Renault Megane 4 throughout the outside
This option is the least difficult of the two, actually, for this one you will just require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article to clarify the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Renault Megane 4. Regardless whether it’s the front or the back of your vehicle the process will be similar.
Here are a few simple guidelines to stick to to perform this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Megane 4
- Use your screwdriver or knife to remove the bulb from its place, if you are afraid of damaging anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the achievement of the procedure.
.
How to change the number plate bulb on your Renault Megane 4 without outside access
Second section of our content page, change this license plate bulb on your Renault Megane 4 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Renault Megane 4
To replace the one on the front plate, nothing could be less complicated, you will have to position yourself under the vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Renault Megane 4
Finally last possibility, you must replace the bulb on the backplate of your Renault Megane 4, but you cannot really open the cover from the outside of your vehicle. In this case, here is the process to accomplish this task:
- Unplug the battery from your Renault Megane 4
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Renault Megane 4, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for changing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to realize it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Renault Megane 4. If you desire to change other bulbs like the position light bulbs on your Renault Megane 4 or the low beam bulbs on Renault Megane 4, don’t be reluctant to read our articles which describe you the operation to follow.
If you wish more guides on the Renault Megane 4, go to our Renault Megane 4 category.
