Regardless it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly working is fundamental. Indeed, bulbs are wearing parts that will predictably burn out after awhile and as a result need to be swapped out. You’re quite likely on this site because one of your parking lights is burnt out and you’re wondering how to change your Renault Megane 3’s license plate bulb, we’ve made this content to help you do it without any help and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Megane 3.
How to replace the license plate bulb on your Renault Megane 3 through the outside
This technique is the easiest of the two, in fact, for this one you will simply require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this document to describe the way.
So let’s start with swapping the number plate bulb by going through the outside of your Renault Megane 3. Regardless it’s the front or the back of your motor vehicle the technique will be identical.
Here are a few simple actions to follow to conduct this service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Megane 3
- Use your screwdriver or knife to remove the bulb from its location, in the event you are scared of damaging anything, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to confirm the successfulness of the operation.
.
How to change the number plate bulb on your Renault Megane 3 without outside access
Second section of our content page, swap this license plate bulb on your Renault Megane 3 without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Renault Megane 3
To replace the one on the front plate, nothing could be less complicated, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Renault Megane 3
Finally last possibility, you must replace the bulb on the backplate of your Renault Megane 3, but you cannot really open the cover from the outside of your motor vehicle. In this case, here is the method to operate this operation:
- Unplug the battery from your Renault Megane 3
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Megane 3, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for swapping license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Renault Megane 3. If you wish to change other bulbs like the position light bulbs on your Renault Megane 3 or the low beam bulbs on Renault Megane 3, don’t hesitate to consult our articles which describe you the procedure to follow.
If perhaps you have any further questions about the Renault Megane 3, do not hesitate to consult our Renault Megane 3 category.
