Regardless it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly functional is very important. In fact, bulbs are wearing units that will predictably burn out after some time and therefore need to be changed. You’re perhaps on this website because one of your parking lights is burnt out and you’re worried about how to change your Renault Megane 2’s license plate bulb, we’ve created this content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Megane 2.
How to swap the license plate bulb on your Renault Megane 2 coming from the outside
This tactic is the simplest of the two, in truth, for this one you will only have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second part of this content to teach you the way.
So let’s start with changing the number plate bulb by going through the outside of your Renault Megane 2. Regardless it’s the front or the back of your car the technique will be identical.
Here are a few simple steps to stick to to perform this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Megane 2
- Use your screwdriver or knife to remove the bulb from its location, if you are worried of damaging something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the achievement of the process.
.
How to replace the number plate bulb on your Renault Megane 2 without outside access
Second part of our content, swap this license plate bulb on your Renault Megane 2 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Renault Megane 2
To swap the one on the front plate, nothing could be less complicated, you will have to position yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to put in too much force otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Renault Megane 2
Finally last option, you must swap the bulb on the backplate of your Renault Megane 2, but you simply cannot open the cover from the outside of your car. In this case, here is the technique to conduct this task:
- Unplug the battery from your Renault Megane 2
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Megane 2, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main tactics for changing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Renault Megane 2. If you desire to change other bulbs like the position light bulbs on your Renault Megane 2 or the low beam bulbs on Renault Megane 2, don’t be reluctant to consult our articles which demonstrate you the process to follow.
In the event that you have any additional questions about the Renault Megane 2, do not hesitate to consult our Renault Megane 2 category.
