Regardless whether it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly functional is fundamental. In reality, bulbs are wearing units that will surely burn out after some time and as a result need to be swapped out. You’re perhaps on this website because one of your parking lights is burnt out and you’re struggling with how to change your Renault Grand Scenic 4’s license plate bulb, we’ve written this content page to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Grand Scenic 4.
How to swap the license plate bulb on your Renault Grand Scenic 4 coming from the outside
This solution is the quickest of the two, actually, for this one you will just have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this document to describe the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Renault Grand Scenic 4. Regardless whether it’s the front or the back of your automobile the technique will be identical.
Here are a few simple guidelines to follow to conduct this service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Grand Scenic 4
- Use your screwdriver or knife to eject the bulb from its placement, if you are afraid of breaking a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.
.
How to change the number plate bulb on your Renault Grand Scenic 4 without outside access
Second section of our content page, change this license plate bulb on your Renault Grand Scenic 4 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Renault Grand Scenic 4
To swap the one on the front plate, nothing could be simpler, you will have to position yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much force otherwise you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Renault Grand Scenic 4
Finally last possibility, you must swap the bulb on the backplate of your Renault Grand Scenic 4, but you cannot open the cover from the outside of your automobile. In such a case, here is the process to operate this operation:
- Disconnect the battery from your Renault Grand Scenic 4
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Grand Scenic 4, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, be aware that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Renault Grand Scenic 4. If you wish to change other bulbs like the position light bulbs on your Renault Grand Scenic 4 or the low beam bulbs on Renault Grand Scenic 4, don’t be reluctant to read our articles which demonstrate you the procedure to follow.
If you wish more tutorials on the Renault Grand Scenic 4, go to our Renault Grand Scenic 4 category.
