Regardless whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are all the time working is extremely important. In fact, bulbs are wearing units that will obviously burn out as time passes and consequently need to be replaced. You’re almost certainly on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Renault Espace 3’s license plate bulb, we’ve written this document to help you do it on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Espace 3.

change-license-plate-bulb-renault-espace-3

How to replace the license plate bulb on your Renault Espace 3 throughout the outside

This solution is the simplest of the two, in fact, for this one you will just need to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this content to teach you the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Renault Espace 3. Regardless whether it’s the front or the back of your motor vehicle the procedure will be the same.
Here are a few simple guidelines to follow to execute this maintenance:

  • With the engine off, disconnect the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Espace 3
  • .

  • Use your screwdriver or knife to eject the bulb from its spot, in the event you are afraid of destroying something, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and check the light to confirm the success of the procedure.

How to change the number plate bulb on your Renault Espace 3 without outside access

Second part of our item, swap this license plate bulb on your Renault Espace 3 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Renault Espace 3

To replace the one on the front plate, nothing could be easier, you will have to position yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.

How to replace the rear license plate bulb on my Renault Espace 3

Finally last solution, you must replace the bulb on the backplate of your Renault Espace 3, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the method to do this task:

  • Disconnect the battery from your Renault Espace 3
  • Find the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, disconnect the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Renault Espace 3, check it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Renault Espace 3. If you need to change other bulbs like the position light bulbs on your Renault Espace 3 or the low beam bulbs on Renault Espace 3, don’t hesitate to browse our articles which demonstrate you the procedure to follow.

To find more tips on the Renault Espace 3, take a look at the Renault Espace 3 category.