It doesn’t matter if it’s for your specific security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are in every case functioning is extremely important. In fact, bulbs are wearing auto parts that will surely burn out after a while and as a result need to be replaced. You’re probably on this site because one of your parking lights is burnt out and you’re wondering how to change your Renault Clio 3’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Clio 3.
How to replace the license plate bulb on your Renault Clio 3 throughout the outside
This method is the fastest of the two, in fact, for this one you will only need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second section of this article content to clarify the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Renault Clio 3. It doesn’t matter if it’s the front or the back of your car the procedure will be similar.
Here are a few simple actions to stick to to carry out this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Clio 3
- Use your screwdriver or knife to remove the bulb from its place, in the event you are worried of breaking a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the successfulness of the procedure.
.
How to change the number plate bulb on your Renault Clio 3 without outside access
Second section of our article, replace this license plate bulb on your Renault Clio 3 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Renault Clio 3
To replace the one on the front plate, nothing could be simpler, you will have to position yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Renault Clio 3
Finally last solution, you must replace the bulb on the backplate of your Renault Clio 3, but you cannot open the cover from the outside of your car. In such a case, here is the approach to operate this operation:
- Disconnect the battery from your Renault Clio 3
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Clio 3, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main approaches for swapping license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Renault Clio 3. If you need to change other bulbs like the position light bulbs on your Renault Clio 3 or the low beam bulbs on Renault Clio 3, don’t be reluctant to browse our content articles which explain you the operation to follow.
To get more tips on the Renault Clio 3, take a look at the Renault Clio 3 category.
