It doesn’t matter if it’s for your own security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are constantly working is extremely important. In fact, bulbs are wearing auto parts that will obviously burn out over the years and consequently need to be swapped out. You’re most certainly in this article because one of your parking lights is burnt out and you’re worried about how to change your Renault Captur’s license plate bulb, we’ve made this document to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Captur.
How to swap the license plate bulb on your Renault Captur through the outside
This option is the simplest of the two, in truth, for this one you will simply need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this content to explain the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Renault Captur. It doesn’t matter if it’s the front or the back of your motor vehicle the process will be similar.
Here are a few simple steps to follow to carry out this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Captur
- Use your screwdriver or knife to eject the bulb from its place, in the event that you are worried of destroying a thing, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to validate the achievement of the process.
.
How to replace the number plate bulb on your Renault Captur without outside access
Second section of our content, replace this license plate bulb on your Renault Captur without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Renault Captur
To swap the one on the front plate, nothing could be less difficult, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much pressure otherwise you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Renault Captur
Finally last possibility, you must swap the bulb on the backplate of your Renault Captur, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the tactic to carry out this task:
- Unplug the battery from your Renault Captur
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Captur, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main tactics for replacing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Renault Captur. If you want to change other bulbs like the position light bulbs on your Renault Captur or the low beam bulbs on Renault Captur, don’t be reluctant to read our articles which describe you the process to follow.
In the event that you have any additional questions about the Renault Captur, do not hesitate to consult our Renault Captur category.
